Animal Surgical Equipment Accessories
Replacement tee for Instech automated blood sampler. 20ga, 3-way, conductive. For rodent sampling with Instech ABS1 or ABS2 samplers.
The Instech ABS2/T20C3 is a three-channel co-extruded tube set for the ABS2™ Automated Blood Sampler. The 0.020 in (0.51 mm) ID fluid path is lined with inert PE to minimize compound adsorption, while the outer PVC layer provides necessary flexibility for peristaltic pumping. This three-channel design allows for complex protocols like simultaneous sampling, IV infusion, and saline flushing. By integrating these paths, the T20C3 ensures a sterile, closed-system interface that protects catheter patency and sample integrity without manual handling.
Features
- Tube Type: 3-channel co-extruded
- Inner Diameter: 0.020 in (0.51 mm)
- Material: PE-lined PVC
- Compatibility: ABS2™ Sampler
- Application: Sampling/Infusion/Flush
- Packaging: Pack of 5 sets
Braintree Scientific Blunt Tip Needle non-sterile,25ga - 1"""" w/standard hub 100/p
Stainless steel, blunt tip, hypodermic needle with standard luer hub. For use as an interface to connect a hypodermic syringe directly to catheter port for intravascular substance administration, blood sampling and catheter flushing. **Sold for research purposes only and not for human use**
Braintree Scientific Partial Body Irradiation Shield, 1.375"" dia, No Flank
Partial Body Irradiation Shield for mice,1.375" dia.fixture The shields are not suitable for 360 degree irradiation (typical of a Cs source), and they are limited for use in units that produce energies less than 350kVp (X-Ray). The fixtures are to be used with fixed beam X-ray sources projecting vertically and do not protect the exit side of the irradiated specimen. A shield designed for use with a Cs source typically requires 4 times the lead thickness. These shields are " (6.35mm) lead, and the attenuation factor depends on the kVp energy they are used with. Attempts to use our shields with a Cs source will result in inadequate shielding and overexposure to protected areas of an animal. The shields are regularly used in the Orthovoltage energy range (<320 kVp) and provide about a 100X attenuation. See Attenuation Curves for a better evaluation. **Sold for research purposes only and not for human use**
Med Vet International 9.0mm Cuffed Endotracheal Tube, Each
Murphy type high volume low pressure. Made of thermosensitive clear PVC that softens at body temperature. Radiopaque line to confirm correct tube placement by X-ray. The smooth tip helps to minimize trauma during intubation. Oral or nasal intubation. Magill Curve. Murphy Eye. Sterile. Single Use.
Med Vet International Advantage II, Dogs 21-55Lb, 4 Cards
Once-a-month topical flea and lice prevention and treatment for use on dogs 7 weeks and older. Active ingredients: imidacloprid 9.10%, pyriproxyfen 0.46%. Kills fleas within 12 hours of application Kills all flea life stages Controls existing flea infestations on the dog and prevents further infestations Treats, prevents and controls lice infestations Fragrance-free Waterproof
Med Vet International 9mm x 19mm Titanium TTA Cage, J1072KAT
TTA (Tibial Tuberosity Advancement) CagesTitaniumCage 9 x 19mm 2.4mm screw
Med Vet International Vaccine, Flu Avert Intranasal10x1 Dose
Equine Influenza Vaccine, for intranasal use onlyShipping charges for refrigerated items are a flat charge based on your location or zone. Cold items are packed on ice and shipped separately in a cooler with expedited shipping. Med-Vet can only ship cold items Monday-Wednesday. *Next Day Air Available With Additional Charges*
Med Vet International Jorvet Nylon Muzzle, 10in, J0169G
The Jorvet 10in. nylon dog muzzle is a comfortable and lightweight muzzle. It has a side easy-release snap buckle and adjustable straps for a snug fit. This borders of this muzzle are reinforced with webbing to make this a long lasting muzzle.
Med Vet International Jorvet Nylon Feline Restraint Bags, Medium Size, J0170
The Jorvet feline restraint bags are made of a washable and waterproof nylon material and are designed for proper restraint of a fractious cat. They have a 2-way zipper running full length over the back for front or rear access. This cat restraint bag is equipped with a quick close velcro collar and front leg openings. The pull-tab zipper flaps provide a quick fur-free closure.
PATTERSON VETERINARY SUPPLY INC Posivac Mouse/Small Rat Nonrebreathing System with Incisor Bar and Diffuser for use with Active Waste Gas Evacuation Systems, Each
Posivac Mouse/Small Rat Nonrebreathing System with Incisor Bar and Diffuser for use with Active Waste Gas Evacuation Systems
Tube sets for Instech P720 peristaltic pumps, .093in ID silicone with .062in ID barb inlet and outlet (mates with 062 tubing). Package of 5, nonsterile.
The Instech P720/TS‑BS062SBS is a barb‑to‑barb tube set for P720 peristaltic pumps, made with .062in ID silicone tubing and .062in ID barb connectors for secure integration with standard laboratory tubing. Supplied non‑sterile in packs of five, these tube sets provide smooth, reliable fluid delivery for higher low‑flow infusion and perfusion applications.
Features
- .062in ID silicone tubing for higher low‑flow performance
- .062in ID barb inlet and outlet connectors
- Non‑sterile tube sets supplied in packs of five
- Compatible with all P720 peristaltic pump models
- Suitable for infusion, perfusion, and general research fluid transfer
Med Vet International Cancellous Screws 3.5mm x 24mm, J0423H, 6 Pack
3.5mm Cancellous Screw. 1.75 Pitch. The coarser thread has a much bigger "bite" into the bone. Use on metaphyseal or other cancellous bone. The screw needs its own tap. (JOR409c)
Med Vet International Locking Screw, J1220L, 2.4mm x 30mm, Each
Jorvet 2.4 twin start locking screws (J1220 series) are fully compatible with the industry standard. The 2.4 locking plates (J1220 series) are available in 4 to 18 hole sizes.2.4mm Locking Screw 2.4 head 30mm long
Med Vet International 2.4mm x 16mm Titanium Cortical Self-Tapping Screws, J1073DT, 6-Pack
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.